MHST02518Z Datasheet, PDF (1/8 Pages) Lineage Power Corporation – Longitudinal and Transverse Heat Sinks

Product Option Sheet
March 28, 2008
Eighth Brick Power Modules Heat Sinks:
¼”, ½”, 1” Longitudinal and Transverse Heat Sinks
RoHS Compliant
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC
(Z versions) including screws
ƒ Heat Sink Material: 6063-T5 Aluminum
ƒ Heat Sink Finish: Black anodize per MIL-A-8625,
Type II, Class 2
ƒ Size:
Length: 2.28 in.
Width: 0.90 in.
ƒ Available heights: ¼”, ½”, 1”
ƒ Available in Longitudinal and Transverse
Orientations
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
These heat sinks are to be used with Lineage Power’s Eighth Brick power modules equipped with the base plate
option (-C or -H option in the module part number). The base plate is factory attached to the module and is designed
to make thermal contact with the power dissipating components on the module and conduct this heat to the outer
surface of the base plate. If a heat sink is attached to this surface of the base plate, it is possible to deliver
increased output power for a specific ambient air temperature and airflow rate.
These heat sinks are available in kits that come complete with the heat sink, attached thermal interface material and
attachment screws.
** ISO is a registered trademark of the International Organization of Standards
Document No: PO08-002 ver. 1.2
PDF name: eighth_hs_po.pdf