KW010A0F41-SR Datasheet, PDF (1/16 Pages) Lineage Power Corporation – 36 - 75Vdc Input; 3.3 to 5.0Vdc Output; 6 to 10A Output Current

Data Sheet
September 9, 2008
KW006-010 Series (Sixteenth-Brick) DC-DC Converter Power Modules:
36–75Vdc Input; 3.3Vdc to 5.0Vdc Output; 6A to 10A Output Current
RoHS Compliant
Applications
ƒ Distributed power architectures
ƒ Wireless networks
ƒ Access and optical network Equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
Options
ƒ Negative Remote On/Off logic
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to RoHS EU Directive 2002/95/EC with lead
solder exemption (non-Z versions)
ƒ Delivers up to 33W output power:
3.3V(10A), 5.0V(6A)
ƒ Small size and low profile:
33.0 mm x 22.9 mm x 8.75 mm
(1.30 in x 0.9 in x 0.344 in)
ƒ Industry standard DOSA footprint
ƒ Output voltage adjustment trim (-20%, +10%)
ƒ Remote On/Off, Positive logic
ƒ Remote Sense
ƒ Over-temperature protection (non-latching)
ƒ Output over-current protection (non-latching)
ƒ Output over-voltage protection (latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ Meets the voltage isolation requirements for
ETSI 300-132-2 and complies with and is licensed for
Basic Insulation rating per EN60950-1
ƒ CE mark meets the 2006/95/EC directive^§
ƒ UL* 60950-1Recognized, CSA^† C22.2 No. 60950-1-03
Certified, and VDE^‡ 0805 (EN60950 3^rd Edition)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
ƒ Surface Mount (Tape and Reel, -SR Suffix)
Description
The KW (Sixteenth-brick) series power modules are isolated dc-dc converters that operate over a wide input voltage
range of 36 to 75Vdc and provide a single precisely regulated output. The output is fully isolated from the input,
allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, typical
efficiency of 87% for 3.3V/10A. These open frame modules are available in surface-mount (-SR) form.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All of the required procedures of end-user equipment should be followed.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS06-114 ver.1.31
PDF name: kw006-010.ds.pdf