|
KSTW015A0F Datasheet, PDF (1/16 Pages) Lineage Power Corporation – 36-75Vdc Input; 3.3Vdc, 15A Output | |||
|
GE
Data Sheet
KSTW015A0F Barracuda⢠Series; DC-DC Converter Power Modules
36-75Vdc Input; 3.3Vdc, 15A Output
RoHS Compliant
Applications
ï§ Wireless Networks
ï§ Hybrid power architectures
ï§ Optical and Access Network Equipment
ï§ Enterprise Networks including Power over Ethernet (PoE)
ï§ Industrial markets
Options
ï§ Negative Remote On/Off logic (preferred)
ï§ Surface Mount/Tape and Reel (-SR Suffix)
ï§ Auto-restart Over current/Over voltage protections
(preferred)
ï§ Shorter through hole pin trim
Features
ï§ Compliant to RoHS II EU âDirective 2011/65/EU (-Z versions)
ï§ Compliant to REACH Directive (EC) No 1907/2006
ï§ Wide Input Voltage Range, 36Vdc to 75Vdc
ï§ No minimum load
ï§ High efficiency â 90.5% at full load (VIN=48Vdc)
ï§ Constant switching frequency
ï§ Low output ripple and noise
ï§ Small Size and low profile, follows DOSA standard 1/16th
footprint
33.0 mm x 22.9 mm x 9.3 mm
(1.30 in x 0.9 in x 0.37 in)
ï· Surface mount (SMT) or Through hole (TH)
ï§ Reflow process compliant, both SMT and TH versions
ï§ Positive Remote On/Off logic
ï§ Output overcurrent/voltage protection (hiccup)
ï§ Over-temperature protection
ï§ Output Voltage adjust: 80% to 110% of Vo,nom
ï§ Wide operating temperature range (-40°C to 85°C)
ï§ UL*Recognized to UL60950-1, CAN/CSAâ C22.2 No.60950-1,
and EN60950-1(VDE â¡ 0805-1) Licensed
ï§ CE mark meets 2006/95/EC directive§
ï§ Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
ï§ 2250 Vdc Isolation tested in compliance with IEEE 802.3¤
PoE standards
ï§ ISO** 9001 and ISO 14001 certified manufacturing facilities
Description
The KSTW015A0F series power modules are isolated DOSA compliant 1/16th brick dc-dc converters that operate over a wide input
voltage range of 36 Vdc -75Vdc and provide a single precisely regulated output voltage at 3.3Vdc. The output is fully isolated from
the input, allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency of 90.5%
typical at full load. Built-in filtering for both input and output minimizes the need for external filtering. The module is fully self-
protected with output over-current and over-voltage, over-temperature and input under voltage shutdown control. Optional
features include negative or positive on/off logic and SMT connections
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.
April 1, 2013
©2012 General Electric Company. All rights reserved.
Page 1
|
▷ |