|
JRCW450U Datasheet, PDF (1/14 Pages) Lineage Power Corporation – 36–75 Vdc Input; 48Vdc Output; 450W Output | |||
|
GE
Data Sheet
JRW450U Orca* Series; DC-DC Converter Power Modules
36â75 Vdc Input; 48Vdc Output; 450W Output
RoHS Compliant
Applications
ï§ RF Power Amplifier
ï§ Wireless Networks
ï§ Switching Networks
Options
ï§ Output OCP/OVP auto restart
ï§ Shorter pins
ï§ Unthreaded heat sink holes
Features
ï§ Compliant to RoHS II EU Directive 2011/65/EC (-Z versions)
ï§ Compliant to REACH Directive (EC) No 1907/2006
ï§ High power density: 166 W/in3
ï§ Very high efficiency: >94% Typ at Full Load
ï§ Industry standard half-brick pin-out
ï§ Low output ripple and noise
ï§ Industry standard half-brick footprint
57.7mm x 60.7mm x 12.7mm
(2.27â x 2.39â x 0.5â)
ï§ Remote Sense
ï§ 2:1 input voltage range
ï§ Single tightly regulated output
ï§ Constant switching frequency
ï§ Constant Current Overcurrent limit
ï§ Latch after short circuit fault shutdown
ï§ Over temperature protection auto restart
ï§ Output voltage adjustment trim, 28.8Vdc to 57.6Vdc
ï§ Wide operating case temperature range (-40°C to 100°C)
ï§ CE mark meets 2006/95/EC directives§
ï§ ANSI/UL# 60950-1, 2nd Ed. Recognized, CSAâ C22.2 No.
60950-1-07 Certified, and VDEâ¡ 0805-1 (EN60950-1, 2nd Ed.)
Licensed
ï§ ISO** 9001 and ISO 14001 certified manufacturing facilities
Description
The JRCW450U Orca series of dc-dc converters are a new generation of isolated, very high efficiency DC/DC power modules
providing up to 450W output power in an industry standard half-brick size footprint, which makes it an ideal choice for high
voltage and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heat sink for
high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations and grounding
connections.
* Trademark of the General Electric Company
# UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
June 7, 2013
©2012 General Electric Company. All rights reserved.
Page 1
|
▷ |