English
Language : 

JNW350R641 Datasheet, PDF (1/15 Pages) Lineage Power Corporation – 36 - 75 Vdc Input; 28Vdc Output; 350W Output
Data Sheet
July 27, 2009
JNW350R Series Power Modules; DC-DC Converters
36-75 Vdc Input; 28Vdc Output; 350W Output
RoHS Compliant
Applications
ƒ RF Power Amplifier
ƒ Wireless Networks
ƒ Switching Networks
Options
ƒ Output OCP/OVP auto restart
ƒ Shorter pins
ƒ Unthreaded heatsink holes
ƒ Tunable Loop™ for transient response
optimization
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC
ƒ Compatible in a Pb-free or SnPb reflow environment
ƒ Compliant to IPC-9592, Class I, Category 2
ƒ High power density: 129 W/in3
ƒ Industry standard half-brick pin-out
ƒ Low output ripple and noise
ƒ Industry standard half-brick footprint
57.7mm x 60.7mm x 12.7mm
(2.27” x 2.39” x 0.5”)
ƒ Remote Sense
ƒ 2:1 input voltage range
ƒ Single tightly regulated output
ƒ Constant switching frequency
ƒ Accepts transient overloads without shutdown
ƒ Latch after fault shutdown
ƒ Over temperature protection auto restart
ƒ Output voltage adjustment trim, 16.8Vdc to 32.0Vdc
ƒ Wide operating case temperature range (-40°C to
100°C)
ƒ CE mark meets 2006/95/EC directives§
ƒ UL60950-1/CSA† C22.2 No. 60950-1-03 Certified
(CCSAUS) and VDE‡ 0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The JNW350R series of dc-dc converters are a new generation of isolated DC/DC power modules providing up to
350W output power in an industry standard half-brick size footprint, which makes it an ideal choice for high voltage
and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heatsink
for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations
and grounding connections. This module contains an optional new feature, the Tunable LoopTM, that allows the user
to optimize the dynamic response of the converter to match the load with reduced amount of output capacitance,
leading to savings on cost and PWB area.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: PDS08-005 ver 1.1
PDF name: jnw350r.ds.pdf
: