JBW050F1 Datasheet, PDF (1/16 Pages) Lineage Power Corporation – 36 to 75 Vdc Input, 3.3 Vdc Output; 33 W

Data Sheet
September 20, 2004
JBW050F Power Modules: dc-dc Converter;
36 to 75 Vdc Input, 3.3 Vdc Output; 33 W
Features
The JBW050F Power Module use advanced, surface-mount
technology and deliver high-quality, efficient, and compact
dc-dc conversion.
Applications
■ Distributed power architectures
■ Workstations
■ Computer equipment
■ Communications equipment
Options
■ Heat sinks available for extended operation
■ Choice of remote on/off logic configuration
■ Short Pins: 3.7 mm ± 0.25 mm
(0.145 in ± 0.010 in)
■ Approved for basic insulation (-B suffix)
Description
■ Small size: 61.0 mm x 57.9 mm x 12.7 mm
(2.40 in. x 2.28 in. x 0.50 in.)
■ High power density
■ High efficiency: 81% typical
■ Low output noise
■ Constant frequency
■ Industry-standard pinout
■ Metal case
■ 2:1 input voltage range
■ Overtemperature protection
■ Overcurrent and overvoltage protection
■ Remote sense
■ Remote on/off
■ Adjustable output voltage: 60% to 110% of VO, nom
■ Case ground pin
■ ISO9001 Certified manufacturing facilities
■ UL* 60950 Recognized, CSA^† C22.2 No. 60950-00
Certified, and EN 60950 (VDE0805):2001-12
Licensed
■ CE mark meets 73/23/EEC and 93/68/EEC
directives^‡
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Assn.
‡ This product is intended for integration into end-use equipment.
All the required procedures for CE marking of end-use equip-
ment should be followed. (The CE mark is placed on selected
products.)
The JBW050F Power Module is a dc-dc converter that operates over an input voltage range of 36 Vdc to 75
Vdc and provides a precisely regulated 3.3 Vdc output. The output is fully isolated from the input, allowing a
versatile polarity configuration and grounding connections. The module has a maximum power rating of 33 W
at a typical full-load efficiency of 81%.
The modules are DC board-mountable and encapsulated in metal cases. Threaded-through holes are provided to
allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set
includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications.