|
FNW700R64-18 Datasheet, PDF (1/14 Pages) Lineage Power Corporation – 36 - 75 Vdc Input; 28Vdc Output; 700W Output | |||
|
Data Sheet
September 6, 2008
FNW700R Series Power Modules; DC-DC Converters
36-75Vdc Input; 28Vdc, 700W Output
Applications
 RF Power Amplifier
 Wireless Networks
 Switching Networks
Options
 Output OCP/OVP auto restart
 Shorter pins
 Unthreaded heatsink holes
Features
 High power density: 127 W/in3
 Industry standard pin-out
 Low output ripple and noise
 Industry standard Full brick footprint
116.6mm x 60.7mm x 12.7mm
(4.6â x 2.4â x 0.5â)
 Remote Sense
 2:1 input voltage range
 Single tightly regulated main output
 Constant switching frequency
 Latch after fault shutdown
 Over temperature protection auto restart
 Loosely regulated auxiliary output
 Power good signal
 Output voltage adjustment trim (+10%/-40%)
 Wide operating case temperature range (-40°C to
100°C)
 CE mark meets 73/23/EEC and 93/68/EEC
directives§
 UL60950-1/CSAâ C22.2 No. 60950-1-03 Certified
(CCSAUS) and VDEâ¡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The FNW700R series of dc-dc converters are a new generation of isolated DC/DC power modules providing up to
700W output power in an industry standard full size brick footprint, which makes it an ideal choice for high voltage
and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heatsink
for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations
and grounding connections
§ This product is intended for integration into end use equipment only
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS07-003 ver 1.45
PDF name: fnw700r.ds.pdf
:
|
▷ |