FLTR100V20 Datasheet, PDF (1/12 Pages) Lineage Power Corporation – 75 Vdc Input Maximum, 20 A Maximum

Data Sheet
March 2008
FLTR100V20 Filter Module
75 Vdc Input Maximum, 20 A Maximum
RoHS Compliant
The FLTR100V20 Filter Module is encapsulated in a small,
nonconductive plastic case.
Features
n Compatible with RoHS EU Directive 200295/EC
n Compatible in Pb- free or SnPb reflow environment
n Small size: 50.8 mm x 40.6 mm x 12.7 mm
(2.0 in. x 1.6 in. x 0.50 in.)
n Optimized for use with high-frequency dc-to-dc
power modules
n Printed-circuit board mountable
n Operating case temperature range:
–40 °C to +100 °C
n UL* 60950 Recognized; CSA^† C22.2 No. 60950-
00 Certified; VDE 0805 (EN60950) Licensed
n CE mark meets 73/23/EEC and 93/68/EEC
directives^‡
Application
n Common-mode and differential-mode filtering of
power supply dc input and output lines
n Communication equipment
n Computer equipment
Description
The FLTR100V20 Filter Module is designed to reduce the conducted common-mode and differential-mode
noise on input or output lines of high-frequency switching power supplies. The module has a maximum current
rating of 20 A. It provides high insertion loss throughout the frequency range regulated by the U.S. Federal
Communications Commission (FCC) and the International Special Committee on Radio Interference (CISPR)
for conducted emissions.
The module is 50.8 mm long, 40.6 mm wide, and 12.7 mm high (2.0 in. x 1.6 in. x 0.50 in.) and mounts on a PC
board in a natural convection or forced-air environment.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Assn.
‡ This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. (The CE mark is placed on selected products.)