FLT012A0 Datasheet, PDF (1/13 Pages) Lineage Power Corporation – 75Vdc Input Voltage Maximum; 12A Output Current Maximum

Data Sheet
February 9, 2012
FLT012A0Z/FLT012A0-SZ Input Filter Modules
75Vdc Input Voltage Maximum; 12A Output Current Maximum
Applications
 Distributed power architectures
 Wireless Networks
 Enterprise Networks
 Access and Optical Network Equipment
Options
 Surface Mount Interconnect (-S)
Features
 Compliant to RoHS EU Directive 2002/95/EC (Z
versions)
 Compatible in a Pb-free or SnPb reflow environment
(Z versions)
 Surface Mount and Through hole versions
 Common-mode and Differential-mode filtering
 Small size and low profile
48.3 mm x 25.4 mm x 11.7 mm
(1.9 in x 1.0 in x 0.46 in)
 Same footprint as FLTR100V10 module
 Cost efficient open frame design
 Wide operating temperature range (-40°C to +85°C)
 Meets the voltage isolation requirements for
ETSI 300-132-2
 UL* 60950-1, 2^nd Ed. Recognized, CSA^† C22.2 No.
60950-1-07 Certified, and VDE^‡(EN60950-1, 2^nd Ed.)
Licensed
 CE mark meets 2006/95/EC directives^§
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The Filter module shall be designed to operate over an input voltage range up to 75Vdc at output current
of 12A in an ambient temperature of -40ºC to 85ºC. The filter module shall be optimized for use with
dc/dc converter modules, to significantly reduce the conducted differential and common-mode noise
returned to the power source. The filter module shall enable designers to meet the requirements of EMI
standards CISPR 22 (EN55022) and FCC Class B by inserting in-line between the power source and the
dc/dc converter module. These modules shall be designed and manufactured to be either surface
mounted(-S version) or through hole mounted on PCBs.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
** ISO is a registered trademark of the International Organization of Standards
§ _{This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.}
Document No:DS11-026 ver 1.2
PDF name: FLT012A0Z_FLT012A0-SZ_ds.pdf