ESTW015A0A Datasheet, PDF (1/19 Pages) Lineage Power Corporation – 36-75Vdc Input; 5.0Vdc, 15A, 75W Output

GE
Data Sheet
ESTW015A0A Barracuda™ Series; DC-DC Converter Power Modules
36-75Vdc Input; 5.0Vdc, 15A, 75W Output
Features
RoHS Compliant
Applications
 Distributed Power Architectures
 Wireless Networks
 Access and Optical Network Equipment
 Industrial Equipment
Options
 Negative Remote On/Off logic (preferred)
 Over current/Over temperature/Over voltage
protections (Auto-restart) (preferred)
 Heat plate versions (-H)
 Surface Mount version (-S)
 Compliant to RoHS II EU “Directive 2011/65/EU (-Z versions)
 Compliant to REACH Directive (EC) No 1907/2006
 Flat and high efficiency curve
 Industry standard, DOSA compliant footprint
 57.9mm x 22.8mm x 7.6mm
 (2.28 in x 0.9 in x 0.30 in)
 Low profile height and reduced component skyline
 Ultra wide input voltage range: 36-75 Vdc
 Tightly regulated output
 Remote sense
 Output Voltage adjust: 80% to 110% of VO,nom
 Constant switching frequency
 Positive remote On/Off logic
 Input under/over voltage protection
 Output overcurrent and overvoltage protection
 Overtemperature protection
 No reverse current during output shutdown
 Wide operating temperature range (-40°C to 85°C)
 Suitable for cold wall cooling using suitable Gap Pad applied
directly to top side of module
 UL*Recognized to UL60950-1, CAN/CSA^† C22.2 No.60950-1,
and EN60950-1(VDE ^‡ 0805-1) Licensed
 CE mark meets 2006/95/EC directive^§
 Meets the voltage and current requirements for ETSI 300-
132-2 and complies with and licensed for Basic insulation
rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE 802.3^¤ PoE
standards
 ISO^**9001 and ISO 14001 certified manufacturing facilities
Description
The ESTW015A0A [Barracuda™] Series, eighth-brick, low-height power modules are isolated dc-dc converters which provide a
single, precisely regulated output voltage over an wide input voltage range of 36-75Vdc. The ESTW015A0A provides 5Vdc nominal
output voltage rated for 15Adc output current. The module incorporates GE’s vast heritage for reliability and quality, while also
using the latest in technology, and component and process standardization to achieve highly competitive cost. The open frame
module construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space
efficient solutions. The module achieves typical full load efficiency greater than 90% at VIN=48Vdc. Standard features include
remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. An optional
heat plate allows for external standard, eighth-brick heat sink attachment to achieve higher output current in high temperature
applications.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
§ _{This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.}
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
March 28, 2013
©2012 General Electric Company. All rights reserved.
Page 1