|
ESTW010A0A Datasheet, PDF (1/19 Pages) Lineage Power Corporation – ESTW010A0A Series (Eighth-Brick) DC-DC Converter Power Modules | |||
|
Data Sheet
November 29, 2011
ESTW010A0A Series (Eighth-Brick) DC-DC Converter Power Modules
36â75Vdc Input; 5.0Vdc Output; 10A Output Current
STINGRAY⢠SERIES
RoHS Compliant
Applications
ï§ Distributed Power Architectures
ï§ Wireless Networks
ï§ Access and Optical Network Equipment
ï§ Industrial Equipment
Options
ï§ Negative Remote On/Off logic (preferred)
ï§ Over current/Over temperature/Over voltage
protections (Auto-restart) (preferred)
ï§ Heat plate version (-H)
ï§ Surface Mount version (-S)
ï§ RoHS 6/6 compliant; Lead Free (-Z)
ï§ For additional options, see Table 2 (Device Options)
under âOrdering Informationâ section.
Features
ï§ Wide input voltage range: 36-75 Vdc
ï§ Monotonic startup into prebiased load
ï§ Output Voltage adjust: 80% to 110% of Vo,nom
ï§ Remote sense
ï§ Constant switching frequency
ï§ Positive remote On/Off logic
ï§ Input under/over voltage protection
ï§ Output overcurrent and overvoltage protection
ï§ Over-temperature protection
ï§ Industry standard, DOSA compliant footprint
57.9mm x 22.8mm x 8.5mm
(2.28 in x 0.9 in x 0.335 in)
ï§ Low profile height and reduced component skyline
ï§ Suitable for cold wall cooling using suitable Gap
Pad applied directly to top side of module
ï§ High efficiency: 91%
ï§ No thermal derating up to 80 °C, 1.0m/s (200 LFM)
ï§ Wide operating temperature range (-40°C to 85°C)
ï§ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ï§ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ï§ UL* 60950-1, 2nd Ed. Recognized, CSAâ C22.2 No.
60950-1-07 Certified, and VDEâ¡ (EN60950-1, 2nd
Ed.) Licensed
ï§ CE mark meets 2006/95/EC directive§
ï§ Meets the voltage and current requirements for
ETSI 300-132-2 and complies with and licensed for
Basic insulation rating per EN60950-1
ï§ 2250 Vdc Isolation tested in compliance with IEEE
802.3¤ PoE standards
ï§ ISO**9001 and ISO 14001 certified manufacturing
facilities
Description
The ESTW010A0A, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 10A
of output current and provide a precisely regulated output voltage of 5.0V over a wide range of input voltages (VIN =
36 - 75Vdc). The modules achieve typical full load efficiency of 91%. The open frame modules construction, available
in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS11-006 ver. 1.01
PDF name: ESTW010A.pdf
|
▷ |