ESTW006A0B Datasheet, PDF (1/18 Pages) Lineage Power Corporation – 36 - 75Vdc Input; 12V/6Adc Output

Data Sheet
November 5, 2012
ESTW006A0B Series (Eighth-Brick) DC-DC Converter Power Modules
36 - 75V_dc Input; 12V/6A_dc Output
Barracuda Series™
RoHS Compliant
Applications
 Distributed Power Architectures
 Wireless Networks
 Access and Optical Network Equipment
 Industrial Equipment
Options
 Negative Remote On/Off logic (preferred)
 Overcurrent/Overtemperature/Overvoltage
protections (Auto-restart) (preferred)
 Heat plate version (-H)
 Surface Mount version (-S)
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Flat and high-efficiency curve
 Industry standard, DOSA compliant footprint
57.9mm x 22.8mm x 7.6mm
(2.28 in x 0.9 in x 0.30 in)
 Low-profile height and reduced component skyline
 Ultra-wide input voltage range: 36-75 Vdc
 Tightly regulated output
 Remote sense
 Output voltage adjust: 90% to 110% of VO,nom
 Constant switching frequency
 Positive remote On/Off logic
 Input under/overvoltage protection
 Output overcurrent and overvoltage protection
 Overtemperature protection
 No reverse current during output shutdown
 Wide operating temperature range (-40°C to 85°C)
 Suitable for cold wall cooling using suitable Gap Pad
applied directly to top side of module
 UL*Recognized to UL60950-1, CAN/CSA^† C22.2
No.60950-1, and EN60950-1(VDE ^‡ 0805-1) Licensed
 CE mark meets 2006/95/EC directive^§
 Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for basic
insulation rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE
802.3^¤ PoE standards
 ISO^**9001 and ISO 14001 certified manufacturing
facilities
Description
The ESTW006A0B [Barracuda™] Series, eighth-brick, low-height power modules are isolated DC-DC converters
that provide a single, precisely regulated output voltage over an input voltage range of 36-75Vdc. The ESTW006A0B
provides 12Vdc nominal output voltage rated for 6Adc output current. The module incorporates Lineage Power’s vast
heritage for reliability and quality, while also using the latest in technology and component and process
standardization to achieve highly competitive cost. The open frame module construction, available in both surface
mount and through-hole packaging, enables designers to develop cost and space efficient solutions. The module
achieves typical full load efficiency greater than 90% at VIN=48Vdc. Standard features include remote On/Off, remote
sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. An optional heat plate
allows for external standard, eighth-brick heat sink attachment to achieve higher output current in high temperature
applications.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
§ _{This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.}
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards
Document No: ver. 1.2
PDF name: ESTW006A0B.pdf