EBVW017A0X Datasheet, PDF (1/15 Pages) Lineage Power Corporation – 36-75Vdc Input; 14.0Vdc Output; 17A Output Current

Data Sheet
April 11, 2013
EBVW017A0S14R0 Series Power Modules; DC-DC Converters
36-75V_dc Input; 14.0V_dc Output; 17A Output Current
BARRACUDA SERIES™
RoHS Compliant
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 DSL systems
Options
 Negative Remote On/Off logic (1=option code,
factory preferred)
 Auto-restart after fault shutdown (4=option code,
factory preferred)
 Base plate option (-H=option code)
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compatible with reflow pin/paste soldering process
 High and flat efficiency profile – 95.4% at 14.0Vdc,
55% load to 90% output
 Wide Input voltage range: 36-75Vdc
 Delivers up to 17Adc output current
 Tightly regulated output voltage
 Low output ripple and noise
 No reverse current during prebias start-up or shut-
down
 Industry standard, DOSA compliant, Eight brick:
58.4 mm x 22.8 mm x 11.3 mm
(2.30 in x 0.90 in x 0.44 in)
 Constant switching frequency
 Positive Remote On/Off logic
 Output over current/voltage protection
 Over temperature protection
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1, 2nd Ed. Recognized, CSA^† C22.2 No.
60950-1-07 Certified, and VDE^‡ (EN60950-1, 2nd
 Ed.) Licensed
 CE mark 2006/96/EC directives^§
 Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for Basic
insulation rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE
802.3¤ PoE standards
 ISO** 9001 and ISO14001 certified manufacturing
facilities
Description
The EBVW017A0S14R0 series of dc-dc converters are a new generation of DC/DC power modules designed to
support 14.0Vdc DSL applications, as distributed power architectures. The EBVW017A0S14R0 series operate from an
input voltage range of 36 to 75Vdc, and provide up to 17A output current at 14.0Vdc output voltage, and 240W output
power in a DOSA standard eighth brick. The converter incorporates digital control, synchronous rectification
technology, and innovative packaging techniques to achieve efficiency reaching 95.5% peak at 14.0Vdc output. This
leads to lower power dissipations such that for many applications a heat sink is not required. Standard features
include on/off control, output overcurrent and over voltage protection, over temperature protection, input under and
over voltage lockout. Optional features include a base plate for heat sink or cold wall applications.
The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. Built-
in filtering for both input and output minimizes the need for external filtering.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.