CPKW002A0C Datasheet, PDF (1/14 Pages) Lineage Power Corporation – Power Module; dc-dc Converter 36-75 Vdc Input; 15.0Vdc 2.0A Output

Data Sheet
October 2, 2009
CPKW002A0C1 Power Module; dc-dc Converter
36-75 Vdc Input; 15.0Vdc 2.0A Output
RoHS Compliant
Applications
ƒ Distributed power architectures
ƒ Wireless Networks
ƒ Access and Optical Network Equipment
Options
ƒ Remote On/Off logic (positive or negative)
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC
(-Z versions)
ƒ Delivers up to 30W of output power: 15V (2A)
ƒ Small size: 33.0 mm x 24.0 mm x 8.5max mm
(1.30 x 0.945 x 0.335 in)
ƒ Through-hole (TH) mounting
ƒ Sixteenth-Brick compatible footprint
ƒ Cost efficient open frame design
ƒ Single tightly regulated output
ƒ Remote On/Off
ƒ Output overcurrent protection
ƒ Output overvoltage protection
ƒ Over temperature protection
ƒ Output voltage adjustment trim -20% to +10%
ƒ Wide operating temperature range (-40°C to +85°C)
ƒ UL* 60950-1 Recognized, CSA† C22.2 No. 60950-1-
03 Certified, and VDE‡ 0805 (IEC60950, 3^rd Edition)
Licensed
ƒ CE mark meets 2006/95/EC directives§
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The CPKW002A0C1 power module is an isolated dc-dc converter that operates over a wide input voltage range of
36 to 75 Vdc and provides a single precisely regulated output. This module is a low cost, smaller size alternative to
the existing QW030C1. The output is fully isolated from the input, allowing versatile polarity configurations and
grounding connections. The module exhibit high efficiency, typical 90% for 15V at 2A. Built-in filtering for both input
and output minimizes the need for external filtering. These open frame modules are available in through-hole (TH)
form. Standard features include Remote On/Off, output voltage adjust, overvoltage, overcurrent and
overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
§ _{This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment should be followed.}
** ISO is a registered trademark of the International Organization of Standards
Document No: DS07-002 ver 1.03
PDF name: cpkw_ds.pdf