|
CP2000DC54 Datasheet, PDF (1/8 Pages) Lineage Power Corporation – Compact Power Line Input: -40 to -72 Vdc; Outputs: ±54 Vdc at 2000W; 5 Vdc at 4W | |||
|
Data Sheet
March 2010
Compact Power Line
CP2000DC54-PE DC/DC Converter
Input: -40 to -72 Vdc; Outputs: ±54 Vdc at 2000W; 5 Vdc at 4W
Applications
ï· 48Vdc distributed power architectures
ï· Power over Ethernet
ï· Routers/Switches
ï· VoIP/Soft Switches
ï· LAN/WAN/MAN applications
ï· File servers
ï· Indoor wireless
ï· Telecommunications equipment
ï· Enterprise Networks
ï· SAN/NAS/iSCSI applications
ï· Advanced workstations
Features
ï· Compact 1-RU form factor providing 22 W/in3
ï· Input Current < 60A at 40 Vdc input
ï· Programmable output voltage from 44V to 58
Vdc,
ï· Output defaulted to 54V
ï· PMBus compliant dual I2C serial bus
communications
ï· Designed to IEEE802.3af Compliance, 2250
output*** isolation to chassis/signals for POE
applications. (see ordering info)
ï· DC Output over-voltage and over-current
protection
ï· DC Input over-voltage and under-voltage
protection
ï· Over-temperature warning and protection
ï· Redundant, parallel operation with active load
sharing and redundant +5V Aux power
ï· Remote ON/OFF
ï· Hot insertion/removal (hot plug)
ï· Four front panel LED indicators
ï· UL* Recognized to UL60950-1, CAN/ CSAâ C22.2
No. 60950-1, and VDEâ¡ 0805-1 Licensed to
IEC60950-1
ï· CE mark meets 2006/95/EC directive §
ï· Internal variable-speed fan control
ï· RoHS 5 compliant
The CP2000DC54-PE DC/DC Converter, also called a Power Entry Module (PEM) in the Compact
Power Line platform is specifically designed to operate as an integral part of a complete distributed power
system. The high-density, front-to-back airflow PEM is designed for minimal space utilization and is highly
expandable for future growth. It is provided with many features including PoE isolation, and dual-
redundant I2C communications busses that allow it to be used in a broad range of applications. The
flexible feature set makes this Power Entry Module an excellent choice for applications requiring modular
dc-to-dc bulk intermediate voltages, such as in distributed power.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All the required procedures for CE marking of end-user
equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
|
▷ |