CAR2548FP_14 Datasheet, PDF (1/15 Pages) Lineage Power Corporation – 90Vac to 264Vac 48Vdc @ 2500W; 3.3Vdc or 5 Vdc @ 1A

GE
Data Sheet
CAR2548FP series rectifier
Input: 90Vac to 264Vac; Output: 48Vdc @ 2500W; 3.3Vdc or 5 Vdc @ 1A
Applications
 48Vdc distributed power architectures
 Cellular Base Stations
 Blade Servers
 Network/ATE Equipment
 Network Attached Storage
 Telecom Access Nodes
 Routers/Switches
Description
Features
 Universal input with PFC
 Constant power characteristic
 3 front panel LEDs: 1-input;2-output; 3 - fault
 Remote ON/OFF control of the 48Vdc output
 Remote sense on the 48Vdc output
 No minimum load requirements
 Redundant parallel operation
 Active load sharing (single wire)
 Hot Plug-ability
 Efficiency: typically 92% @ 50% load
 Standby orderable either as 3.3Vdc or 5Vdc
 Auto recoverable OC & OT protection
 Operating temperature: -10 - 70C (de-rated above 50C)
 Digital status & control: I²C and PMBus serial bus
 EN/IEC/UL60950-1 2^nd edition; UL, CSA and VDE
 EMI: class B FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
 Shock & vibration: NEBS GR-63-CORE, level 3
The CAR2548FP series of Front-End rectifiers provide highly efficient isolated power from worldwide input mains in a
compact 1U industry standard form factor in an unprecedented power density of 27W/in³. These rectifiers
complement the CAR2548DC converter, providing comprehensive solutions for systems connected either to
commercial ac mains, 48/60Vdc power plants or telecom central offices. This plug and play approach offers
significant advantages since systems can be reconfigured and repositioned readily by simply replacing the power
supply. The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for
future growth. The industry standard PMBus compliant I²C communications buss offers a full range of control and
monitoring capabilities. The SMBusAlert signal pin alerts customers automatically of any state change within the
power supply.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ Intended for integration into end-user equipment. All the required procedures for CE marking of end-user equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
+ PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
March 28, 2013
©2013 General Electric Company. All rights reserved.