CAR2548DC_14 Datasheet, PDF (1/15 Pages) Lineage Power Corporation – -36Vdc to -75Vdc 48Vdc @ 2500W; 3.3Vdc or 5 Vdc @ 1A

GE
Data Sheet
CAR2548DC series dc-dc converter
Input: -36Vdc to -75Vdc; Output: 48Vdc @ 2500W; 3.3Vdc or 5 Vdc @ 1A
Applications
 48Vdc distributed power architectures
 Cellular Base Stations
 Satellite Hubs
 Network Equipment
 Network Attached Storage
 Telecom Access Nodes
 Routers/Switches/ATE Equipment
Description
Features
 3 front panel LEDs: 1-input;2-output; 3 - fault
 Output programmable from 43.2 – 56Vdc
 Remote ON/OFF control of the 48Vdc output
 Remote sense (up to 0.25V) on the 48Vdc output
 No minimum load requirements
 Redundant parallel operation
 Active load sharing (single wire)
 Efficiency: typically 91%
 Standby orderable either as 3.3Vdc or 5Vdc
 Auto recoverable OC & OT protection
 Operating temperature: -10 - 70C
(de-rated above 50C)
 Digital status & control: I²C and PMBus serial bus
 EN/IEC/UL60950-1 2^nd edition; UL, CSA and VDE
 EMI: class B FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
 Shock & vibration: NEBS GR-63-CORE, level 3
The CAR2548DC series of DC-DC Converters provide highly efficient isolated power from DC input mains in a
compact 1U industry standard form factor in an unprecedented power density of 27W/in³. These converters
complement the CAR2548FP rectifier providing comprehensive solutions for systems connected either to commercial
ac mains, 48/60Vdc power plants or telecom central offices. This plug and play approach offers significant
advantages since systems can be reconfigured and repositioned readily by simply replacing the power supply. The
high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growth. The industry standard PMBus compliant I²C communications buss offers a full range of control and
monitoring capabilities. The SMBusAlert signal pin alerts customers automatically of any state change within the
power supply.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ Intended for integration into end-user equipment. All the required procedures for CE marking of end-user equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
+ PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
December 6, 2013
©2013 General Electric Company. All rights reserved.