|
CAR2512TE Datasheet, PDF (1/15 Pages) Lineage Power Corporation – 90VAC to 264VAC 12VDC@ 2500W; 3.3/5VDC standby @ 15W | |||
|
GE
Preliminary Data Sheet
CAR2512TE Front-End
Input: 90VAC to 264VAC; Output: 12VDC@ 2500W; 3.3/5VDC standby @ 15W
Applications
ï· 12Vdc distributed power architectures
ï· Datacom and Telecom applications
ï· Mid to high-end Servers
ï· Routers/Switches
ï· Broadband Switches
ï· ATE Equipment
Description
Features
ï· Efficiency meets 80plus âPlatinumâ requirements
ï· Universal input with PFC
ï· Constant power characteristic
ï· 2 front panel LEDs: 1-input;2-[DC_OK, fault, warning]
ï· Remote ON/OFF control of the 12Vdc output
ï· Remote sense on the 12Vdc output
ï· No minimum load requirements
ï· Active load sharing (single wire)
ï· Hot Plug-ability
ï· Standby orderable either as 3.3Vdc or 5Vdc
ï· Auto recoverable OC & OT protection
ï· Operating temperature: -10 - 70ï°C (de-rated above 50ï°C)
ï· Digital status & control: I2C and PMBus serial bus
ï· EN/IEC/UL60950-1 2nd edition; UL, CSA, VDE , and CCC
ï· EMI: class A FCC docket 20780 part 15, EN55022
ï· Meets EN61000 immunity and transient standards
ï· Shock & vibration: Meets IPC 9592 Class II standards
The CAR2512TE Front-End provides highly efficient isolated power from worldwide input mains in a compact 1U
industry standard form factor in an unprecedented power density of 25W/in3. Ideal for applications where mid to light
load efficiency is of key importance. This front-end is complemented by the CAR2512DC dc/dc converter designed to
convert 48/60Vdc power of telecom central offices. This plug and play approach offers rapid system reconfiguration
by simply replacing the power supply.
The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growth. The industry standard PMBus compliant I2C communications buss offers a full range of control and
monitoring capabilities. The SMBAlert signal pin alerts customers automatically of any state change within the power
supply.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ Intended for integration into end-user equipment. All the required procedures for CE marking of end-user equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
+ PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
February 7, 2014
©2013 General Electric Company. All rights reserved.
|
▷ |