English
Language : 

CAR2024FP_14 Datasheet, PDF (1/7 Pages) Lineage Power Corporation – Universal input with PFC Constant power characteristic front panel LEDs: input, output, fault
GE Energy
Data Sheet
CAR2024FP series rectifier
Input: 90Vac to 264Vac; Output: 24Vdc @ 83A; 3.3Vdc or 5 Vdc @ 1A
Applications
 24Vdc distributed power architectures
 Telecom Base Stations
 Mid to high-end Servers
 Enterprise Networking
 Network Attached Storage
 Telecom Access Nodes
 Routers/Switches
 Broadband Switches
 ATE Equipment
Features
 Universal input with PFC
 Constant power characteristic
 3 front panel LEDs: input, output, fault
 Remote ON/OFF control of the 24Vdc output
 Remote sense on the 24Vdc output
 No minimum load requirements
 Redundant parallel operation
 Active load sharing (single wire)
 Hot Plug-ability
 Efficiency: typically 90% @ 50% load
 Standby orderable either as 3.3Vdc or 5Vdc
 Auto recoverable OC & OT protection
 Operating temperature: -10 - 70C (de-rated above
50C)
 Digital status & control: I2C and PMBus serial bus
 EN/IEC/UL60950-1 2nd edition; UL, CSA and VDE
 EMI: class A FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
 Shock & vibration: NEBS GR-63-CORE, level 3
Description
The CAR2024FP series of Front-End rectifiers provide highly efficient isolated 2000 watts @ 24Vdc power from
worldwide input mains in a compact 1U industry standard form factor in an unprecedented power density of 21W/in3.
These rectifiers are ideal for either datacom or telecom applications such as enterprise networking, remote base
stations, mid to high-end servers, and storage equipment, where mid to light load efficiency is of key importance
given the nature of the power consumption of the end application.
The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growth. The industry standard PMBus compliant I2C communications buss offers a full range of control and
monitoring capabilities. The SMBAlert signal pin alerts customers automatically of any state change within the power
supply.
March 28, 2013
©2012 General Electric Company. All rights reserved.