CAR0812FP Datasheet, PDF (1/15 Pages) Vishay Siliconix – 850 Watt +12V Front End Power Supply

GE
Data Sheet
CAR0812FP series rectifier
Input: 85VAC to 264VAC; Output: 12VDC @ 850W; 3.3VDC or 5 VDC @ 1A
RoHS Compliant
Applications
 12VDC distributed power architectures
 Datacom and Telecom applications
 Mid to high-end Servers
 Enterprise Networking
 Network Attached Storage
 Telecom Access Nodes
 Routers/Switches
 ATE Equipment
Features
 Universal input with PFC
 Constant power characteristic
 2 front panel LEDs: LED1-input
LED2 - [output, fault, over temp]
 Remote ON/OFF control of the 12VDC output
 Remote sense on the 12VDC output
 No minimum load requirements
 Active load sharing (single wire)
 Hot Plug-ability
 Efficiency: typically 92.5% @ 50% load
and 90.0% @ 20% load
 Standby orderable either as 3.3VDC or 5VDC
 Auto recoverable OC & OT protection
 Operating temperature: -10 - 70C (de-rated above 50C)
 Digital status & control: I²C and PMBus serial bus
 EN/IEC/UL60950-1 2^nd edition; UL, CSA and VDE
 EMI: class A or B FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
 Shock & vibration: NEBS GR-63-CORE, level 3
Description
The CAR0812FP series of rectifiers provide highly efficient isolated power from world-wide commercial AC mains.
Offered in the industry standard compact 1U form factor, these rectifiers complement the CAR0812DC converter line,
providing comprehensive solutions for systems connected either to commercial ac mains or 48/60VDC power plants.
This plug and play approach, between AC and DC input units, has significant advantages since systems can be readily
reconfigured by simply replacing the power supply.
The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growthThe industry standard PMBus compliant I²C communications buss offers a full range of control and monitoring
capabilities. The SMBAlert signal pin alerts customers automatically of any state change within the power supply.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ Intended for integration into end-user equipment. All the required procedures for CE marking of end-user equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
+ PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
May 2, 2013
©2013 General Electric Company. All rights reserved.
Page 1