CAR0812DC Datasheet, PDF (1/16 Pages) Lineage Power Corporation – Reverse input voltage protection Remote ON/OFF control of the 12VDC output

GE
Data Sheet
CAR0812DC Series DC-DC Converter
Input: -36VDC to -75VDC; Output: +12 VDC @ 850W; 3.3VDC or 5 VDC @ 1A
RoHS Compliant
Applications
• 12VDC distributed power architectures
• Mid-End Servers
• Blade Servers
• Storage Area Networks
• Routers/Switches
• Enterprise Networks
• Advanced workstations
Features
 Reverse input voltage protection
 2 front panel LEDs: LED 1-input,
LED2-[output, fault, over temp]
 Remote ON/OFF control of the 12VDC output
 12Vdc Regulation: set point ±0.2%, overall ±3%
 12Vdc programmable between 10.8 – 13.2VDC
 Active load sharing on the 12V output
 Firmware adjustable overload set point of 12V output
 Standby orderable either as 3.3VDC or 5VDC
 Efficiency: typically 92% @ 50% load
Exceeds 80plus GOLD standard
 Auto recoverable protection
 Hot insertion/removal (hot plug)
 Operating temperature: -10 - 70C,
 Digital status & control: I²C and PMBus⁺ serial bus
 EN/IEC/UL60950-1 2^nd edition; UL^*, CSA^† and VDE^‡
 CE^§ mark meets 2006/95/EC directive
 EMI: class B FCC docket 20780 part 15, EN55022
 Meets EN6100 immunity and transient standards
Description
The CAR0812DC series of converters provide highly efficient isolated power from 48/60Vdc -input systems. Offered in
the industry standard compact 1U form factor, these converters complement the CAR0812 rectifier line, providing
comprehensive solutions for systems connected either to commercial AC mains or 48/60Vdc power plants. This plug
and play approach, between AC and DC input units, has significant advantages since systems can be readily
reconfigured by simply replacing the power supply.
The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future
growth. The industry standard PMBus compliant I²C communications bus offers a full range of control and monitoring
capabilities. The SMBusAlert signal pin alerts customers automatically of any state change within the power supply.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ Intended for integration into end-user equipment. All the required procedures for CE marking of end-user equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the International Organization of Standards.
+ PMBus name and logo are registered trademarks of the System Management Interface Forum (SMIF)
April 23, 2013
©2013 General Electric Company. All rights reserved.