AXH010A0Y9 Datasheet, PDF (1/19 Pages) Lineage Power Corporation – Austin LynxTM SMT Non-Isolated dc-dc Power Modules

Data Sheet
March 28, 2008
Austin Lynx^TM SMT Non-Isolated dc-dc Power Modules:
3.0 Vdc - 5.5 Vdc Input, 0.9 Vdc - 3.3 Vdc Output, 10 A
RoHS Compliant
Applications
n Workstations,Servers and Desktop computers
n Distributed Power Architectures
n Telecommunications Equipment
n LANs/WANs
n Data processing Equipment
n Latest generation IC’s (DSP, FPGA, ASIC) and Micropro-
cessor-powered applications.
Features
n Compatible with RoHS EU Directive 200295/EC
n Compatible in Pb- free or SnPb reflow environment
n Delivers up to 10A output current
n High efficiency: 95% at 3.3V full load
n Small size and low profile:
33 mm x 13.5 mm x 8.30 mm
(1.3 in x 0.53 in x 0.33 in)
n Light Weight 0.23 oz(6.5 g)
n Cost-efficient open frame design
n High reliability: MTBF > 10M hours at 25 °C
n Constant switching frequency (300 KHz typical)
n Output overcurrent protection with auto-restart
n Overtemperature protection
n Surface Mount Package,Tape and Reel
n Adjustable output voltage (-5% to +10% for 0.9V output)
n Remote On/Off
n Wide Operating temperature range:-40 °C to +85 °C
n UL* 60950 Recognized, CSA^† C22.2 No. 60950-00 Certi-
fied, and VDE^‡ 0805 (IEC60950, 3rd edition) Licensed
Options
n Remote Sense
Description
Austin Lynx™ power modules are non-isolated dc-dc converters that can deliver 10 A of output current with full load effi-
ciency of 95% at 3.3 V output. These open frame modules in surface-mount-package enable designers to develop cost-and
space efficient solutions. Standard features include remote ON/OFF, output voltage adjustment, overcurrent and overtem-
perature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the Internation Organization of Standards
Document Name: FDS02-034EPS ver.1.6
PDF Name: Austin Lynx SMT