AXH010A0S0R9 Datasheet, PDF (1/15 Pages) Lineage Power Corporation – 3.0Vdc-5.5Vdc Input, 0.9 Vdc - 3.3 Vdc Output, 10 A

Data Sheet
March 28, 2008
Austin Lynx^TM SIP Non-Isolated dc-dc Power Modules:
3.0 Vdc - 5.5 Vdc Input, 0.9 Vdc - 3.3 Vdc Output, 10 A
RoHS Compliant
Applications
n Distributed Power Architectures
n Wireless Networks
n Access and Optical Network Equipment
n Enterprise Networks
n Data processing Equipment
n Latest generation IC’s (DSP, FPGA, ASIC) and Micropro-
cessor-powered applications.
Options
n Remote Sense
n Long Pins: 5.08 mm ± 0.25 mm
(0.200 in ± 0.010 in)
Features
n Compatible with RoHS EU Directive 200295/EC (-Z Ver-
sions)
n Compatible in RoHS EU Directive 200295/EC with lead
solder exemption (non -Z versions)
n Delivers up to 10A output current
n High efficiency: 95% at 3.3V full load
n Small size and low profile:
50.8 mm x 8.10mm x 12.7mm
(2.0 in x 0.32 in x 0.5 in)
n Light Weight 0.27 oz(7.5 g)
n Cost-efficient open frame design
n High reliability: MTBF > 10M hours at 25 °C
n Remote On/Off
n Output overcurrent protection with auto-restart
n Overtemperature protection
n Constant frequency (300 kHz,typical)
n Adjustable output voltage ± 10% of VO (–5% to + 10% for
0.9 V output)
n Single-In-Line (SIP) Package
n UL* 60950 Recognized, CSA^† C22.2 No. 60950-00 Certi-
fied, and VDE^‡ 0805 (IEC60950, 3rd edition) Licensed
Description
Austin Lynx™ power modules are non-isolated dc-dc converters that can deliver 10 A of output current with full load efficiency of
95% at 3.3 V output. These open frame modules in SIP package enable designers to develop cost-and space efficient solutions.
Standard features include remote ON/OFF, output voltage adjustment, overcurrent and overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. (The CE mark is placed on selected products.)
** ISO is a registered trademark of the Internation Organization of Standards
Document Name: FDS02-047EPS ver.1.6
PDF Name: Austin Lynx SIP