English
Language : 

AXH003A0X-SR Datasheet, PDF (1/20 Pages) Lineage Power Corporation – 2.4 - 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 3A output current
Data Sheet
February 26, 2009
Austin MinilynxTM SMT Non-isolated Power Modules:
2.4Vdc –5.5Vdc input; 0.75Vdc to 3.63Vdc Output;3A Output Current
RoHS Compliant
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Delivers up to 3A output current
ƒ High efficiency – 94% at 3.3V full load (VIN = 5.0V)
ƒ Small size and low profile:
20.3 mm x 11.4 mm x 7.27 mm
(0.80 in x 0.45 in x 0.286 in)
ƒ Low output ripple and noise
ƒ High Reliability:
Calculated MTBF = 11.9M hours at 25oC Full-load
ƒ Constant switching frequency (300 kHz)
ƒ Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
ƒ Line Regulation: 0.4% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-
03 Certified, and VDE‡ 0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin MiniLynxTM SMT (surface mount technology) power modules are non-isolated dc-dc converters that can
deliver up to 3A of output current with full load efficiency of 94.0% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide
range of input voltage (VIN = 2.4 – 5.5Vdc). Their open-frame construction and small footprint enable designers to
develop cost- and space-efficient solutions.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-026 ver. 1.12
PDF name: minilynx_smt_ds.pdf