|
ATH010A0X3-SR Datasheet, PDF (1/21 Pages) Lineage Power Corporation – 2.4 - 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current | |||
|
Data Sheet
August 28, 2009
Austin LynxTM II SMT Non-isolated Power Modules:
2.4Vdc â5.5Vdc input; 0.75Vdc to 3.63Vdc Output;10A Output Current
RoHS Compliant
EZ-SEQUENCETM
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Enterprise Networks
 Latest generation ICâs (DSP, FPGA, ASIC) and
Microprocessor powered applications
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Flexible output voltage sequencing EZ-
SEQUENCETM
 Delivers up to 10A output current
 High efficiency â 95% at 3.3V full load (VIN = 5.0V)
 Small size and low profile:
33.0 mm x 13.5 mm x 8.28 mm
(1.30 in x 0.53 in x 0.326 in)
 Low output ripple and noise
 High Reliability:
Calculated MTBF = 15.7M hours at 25oC Full-load
 Constant switching frequency (300 kHz)
 Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4 % (typical)
 Remote On/Off
 Remote sense
 Output overcurrent protection (non-latching)
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSAâ C22.2 No. 60950-1-
03 Certified, and VDEâ¡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin LynxTM II SMT (surface mount technology) power modules are non-isolated DC-DC converters that can
deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a
precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide
range of input voltage (VIN = 2.4 â 5.5Vdc). The Austin LynxTM II series has a sequencing feature, EZ-
SEQUENCETM that enable designers to implement various types of output voltage sequencing when powering
multiple voltages on a board.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-105 ver. 1.03
PDF name: lynx_II_smt_ds.pdf
|
▷ |