|
ATA010A0X3 Datasheet, PDF (1/19 Pages) Lineage Power Corporation – 8.3 - 14Vdc input; 0.75Vdc to 5.5Vdc Output; 10A output current | |||
|
Data Sheet
March 30, 2008
Austin LynxTM II 12V SIP Non-isolated Power Modules:
8.3 â 14Vdc input; 0.75Vdc to 5.5Vdc Output; 10A Output Current
RoHS Compliant
EZ-SEQUENCETM
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Flexible output voltage sequencing EZ-
SEQUENCETM
 Delivers up to 10A output current
 High efficiency â 93% at 3.3V full load (VIN = 12.0V)
 Small size and low profile:
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Enterprise Networks
 Latest generation ICâs (DSP, FPGA, ASIC) and
Microprocessor powered applications
50.8 mm x 12.7 mm x 8.1 mm
(2.00 in x 0.5 in x 0.32 in)
 Low output ripple and noise
 High Reliability:
Calculated MTBF = 15M hours at 25oC Full-load
 Constant switching frequency (300 kHz)
 Output voltage programmable from 0.75 Vdc to
5.5Vdc via external resistor
 Line Regulation: 0.3% (typical)
 Load Regulation: 0.4% (typical)
 Temperature Regulation: 0.4 % (typical)
 Remote On/Off
 Remote sense
 Output overcurrent protection (non-latching)
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1Recognized, CSAâ C22.2 No. 60950-1-
03 Certified, and VDEâ¡ 0805:2001-12 (EN60950-1)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin LynxTM II 12V SIP (singe in-line package) power modules are non-isolated dc-dc converters that can deliver
up to 10A of output current with full load efficiency of 93% at 3.3V output. These modules provide a precisely
regulated output voltage programmable via an external resistor from 0.75Vdc to 5.0Vdc over a wide range of input
voltage (VIN = 8.3 â 14Vdc). The Austin LynxTM II 12V series has a sequencing feature, EZ-SEQUENCETM that
enable designers to implement various types of output voltage sequencing when powering multiple voltages on a
board.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-023 ver. 1.24
PDF name: lynx_II_sip_12v_ds.pdf
|
▷ |