LUY9553-TR1A Datasheet, PDF (9/11 Pages) –

PART NO. LUY9553/TR1
Recommended Soldering Conditions
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 8/10
1. Hand Solder
Basic spec is 320 3 sec one time only.
2. Wave Solder
Soldering heat Max. 260
120 ~ 150
Preheat
120 ~ 180 sec
245 5 within 5 sec
3 PB-Free Reflow Solder
1~5° C/sec
1~5° C/sec
Preheat
180~200 ° C
Above 220 ° C
60 sec.Max.
260° C MaX.
10sec.Max
6° C/sec
120 sec.Max.
Note:
1.Reflow soldering should not be done more than two times.
2.When soldering,do not put stress on the LEDs during heating.
3.After soldering,do not warp the circuit board.