LSRUG31042-P1-PF-TBS-X Datasheet, PDF (9/10 Pages) LIGITEK electronics co., ltd. – BIPOLAR TYPE LED LAMPS

PART NO.LSRUG31042/P1-PF/TBS-X
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 8/9
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350 ° C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to case)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 120seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to case)
Temp(° C)
260°
120°
25°
0° ₀
2° /sec
max
100
Preheat
260° C3sec Max
5° /sec
max
200
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
250
Time(sec)