LMD5721-2AEGR-XX-P2-PF Datasheet, PDF (9/10 Pages) LIGITEK electronics co., ltd. – DOT MATRIX LED DISPLAY(2.0Inch)

PART NO. LMD5721/2AEGR-XX/P2-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 8/9
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350 ° C Max
Soldering Time:3 Seconds Max(One time only)
Distance:Solder Temperature 1/16 Inch Below Seating
Plane For 3 Seconds At 260 ° C
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:Solder Temperature 1/16 Inch Below Seating
Plane For 3 Seconds At 260°C
Temp(° C)
260° C3sec Max
5° /sec
max
2° /sec
max
Preheat
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
Time(sec)