LRGB9553-S17-TR1 Datasheet, PDF (8/10 Pages) LIGITEK electronics co., ltd. – SURFACE MOUNT LED TAPE AND REEL

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LRGB9553/S17/TR1
Recommended Soldering Conditions
Page 7/9
1. Hand Solder
Basic spec is 280 3 sec one time only.
2. Wave Solder
Soldering heat Max. 260
245 5 within 5 sec
120 ~ 150
Preheat
3. LEAD Reflow Solder
Temp.
()
240
150
120
120 ~ 180 sec
Rising
+5 /sec
Preheat
Cooling
-5 /sec
60 ~ 120 sec
4. PB-Free Reflow Solder
5sec
1~5° C/sec
1~5° C/sec
Preheat
180~200° C
Above 220° C
60 sec.Max.
Time
260° C MaX.
10sec.Max
120 sec.Max.
Note: 1.Wave solder and reflow soldering should not be made more than one time.
2.You can just only select one of the soldering conditions as above.