LMD8801-2CHYS-XX-PF Datasheet, PDF (8/9 Pages) LIGITEK electronics co., ltd. – DOT MATRIX DIGIT LED DISPLAY (0.79Inch)

PART NO. LMD8801/2CHYS-XX-PF
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 7/8
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350° C Max
Soldering Time:3 Seconds Max(One time only)
Distance:Solder Temperature 1/16 Inch Below Seating
Plane For 3 Seconds At 260°C
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2° C/sec(max)
Ramp-Down:-5° C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:Solder Temperature 1/16 Inch Below Seating
Plane For 3 Seconds At 260° C
Temp(° C)
260°
120°
25°
0° ₀
2° /sec
max
Preheat
50
60 Seconds Max
260° C3sec Max
5° /sec
max
100
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)