LSRG2092-R6-PF-TBS-2 Datasheet, PDF (7/8 Pages) LIGITEK electronics co., ltd. – TAPE AND BOX TYPE LED LAMPS

PART NO. LSRG2092/R6-PF/TBS-2
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/7
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350¢XC Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120¢XC Max
Preheat time: 60seconds Max
Ramp-up
2¢XC/sec(max)
Ramp-Down:-5¢XC/sec(max)
Solder Bath:260¢XC Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(¢XC)
260¢XC3sec Max
5¢X/sec
max
2¢X/sec
max
Preheat
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
Time(sec)