LUR9553H-TR1 Datasheet, PDF (6/8 Pages) LIGITEK electronics co., ltd. – SURFACE MOUNT LED TAPE AND REEL

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LUR9553H/TR1
Soldering Iron:
Page 5/7
Basic spec is 5 sec when 260 If temperature is higher, time should be shorter(+10
-1sec).
Power dissipation of iron should be smaller than 15W,and temperature should be controllable.
Surface temperature of the device should be under 230 .
Soldering heat
Soldering heat Max. 260
120 ~ 150
Preheat
120 ~ 180 sec
245 5 within 5 sec
Temp.
()
220
150
120
Reflow Temp/Time
Rising
+5 /sec
Preheat
Cooling
-5 /sec
60 ~ 120 sec
5sec
Time