LSSD215-6A-XX Datasheet, PDF (6/7 Pages) LIGITEK electronics co., ltd. – SINGLE DIGIT SMD DISPLAY(0.28")

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SMT REFLOW SOLDERING INSTRUCTIONS
SMT Soldering Profile
Pb free reflow soldering Profile
217 °C
200 °C
255-260 °C
3 °C/SEC.MAX.
150 °C
3 °C/SEC.MAX.
60-120SEC.
TIME
SOLDERING IRON
≦5 SEC.
6 °C/SEC.MAX.
100SEC.MAX.
Basic spec is ≦4 sec when 260°C. If temperature is higher, time should
be shorter (+10°C→1 sec). Power dissipation of Iron should be smaller
than 15W, and temperature should be controllable. Surface temperature
of the device should be under 230°C.
REWORK
Customer must finish rework within 3 sec. under 350℃.
The head of soldering iron cannot touch copper foil.
TEL:[phone] FAX：02-7703-6286 No. 238, Bo-ai St., Shulin District, New Taipei City 238, Taiwan R.O.C
www.ligitek.com © 2011 LIGITEK All Rights Reserved
Page 5