FHS-40-P-SP600 Datasheet, PDF (17/18 Pages) LEM – Current transducer FHS 40-P/SP600

Dimensions FHS 40-P/SP600 (in mm)
Side view
FHS 40-P/SP600
0 - 100A
Cross-section
Top view
XY positioning
± 150 µm
Pin connections
Pin 1 : V_REF
Pin 2 : V_OUT
Pin 3 : 0 V
Pin 4 : 5 V
Pin 5 : 0 V
Pin 6 : 0 V
Pin 7 : Standby
Pin 8 : V_OUTFast
Mechanical characteristics
●● Recommended reflow soldering profile
as standard: IPC/JEDEC J-STD-020 revision C
●● Mass
●● Tape and reel quantity
0.08 g
3000 parts
Notes:
All dimensions are in millimeters (angles in degrees)
* Dimensions do not include mold flash, protrusions or gate burrs (shall
not exceed 0.15 per side).
** dimension does not include interleads flash or protrusion (shall not
exceed 0.25 per side).
*** Dimension does not include dambar protrusion.
Allowable dambar protrusion shall be 0.08 mm total in excess of the
dimension at maximum material condition.
Dambar cannot be located on the lower radius of the foot.
100727/10
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
Page 17/18
www.lem.com