|
LTS15-NP_11 Datasheet, PDF (1/3 Pages) LEM – Current Transducer | |||
|
Current Transducer LTS 15-NP
For the electronic measurement of currents: DC, AC, pulsed,
mixed with galvanic isolation between the primary circuit (high power)
and the secondary circuit (electronic circuit).
IPN =± 15 At
Electrical data
16058
IPN
Primary nominal current rms
IPM
Primary current, measuring range
ÃP
Overload capability
VOUT Output voltage (Analog) @ IP
IP = 0
G
Sensitivity
NS
RL
R IM
TCR IM
VC
IC
Number of secondary turns (± 0.1 %)
Load resistance
Internal measuring resistance (± 0.5 %)
Temperature coefficient of R IM
Supply voltage (± 5 %)
Current consumption @ VC = 5 V
Typ
Accuracy - Dynamic performance data
15
At
0 .. ± 48
At
250
At
2.5 ± (0.625·IP/IPN) V
2.5 1)
V
41.6 mV/A
2000
⥠2 kW
83.33
W
< 50 ppm/K
5
V
28+IS2)+(VOUT/RL) mA
X
Accuracy @ IPN, TA = 25°C
ε
L
Accuracy with RIM @ IPN, TA = 25°C
Linearity error
± 0.2
%
± 0.7
%
< 0.1
%
Typ Max
TCVOUT Temperature coefficient of VOUT @ IP= 0 - 10°C .. + 85°C 65 120 ppm/K
- 40°C .. - 10°C 65 170 ppm/K
TCG Temperature coefficient of G - 40°C .. + 85°C
50 3) ppm/K
VOM
Magnetic offset voltage @ IP = 0,
after an overload of 3 x IPN
± 0.5 mV
5 x IPN ± 2.0 mV
10 x IPN ± 2.0 mV
tra
tr
di/dt
Reaction time @ 10 % of IPN
Response time to 90 % of IPN step
di/dt accurately followed
< 100
< 400
> 35
ns
ns
A/µs
BW Frequency bandwidth (0 .. - 0.5 dB)
DC .. 100 kHz
(- 0.5.. 1 dB)
DC .. 200 kHz
General data
TA
Ambient operating temperature
TS
Ambient storage temperature
m
Mass
Standards
- 40 .. + 85
°C
- 40 .. + 100 °C
10
g
EN 50178: 1997
IEC 60950-1: 2001
Features
ââ Closed loop (compensated) multi-
range current transducer using
the Hall effect
ââ Unipolar voltage supply
ââ Isolated plastic case recognized
according to UL 94-V0
ââ Compact design for PCB
mounting
ââ Incorporated measuring
resistance
ââ Extended measuring range.
Advantages
ââ Excellent accuracy
ââ Very good linearity
ââ Very low temperature drift
ââ Optimized response time
ââ Wide frequency bandwidth
ââ No insertion losses
ââ High immunity to external
interference
ââ Current overload capability.
Applications
ââ AC variable speed drives and
servo motor drives
ââ Static converters for DC motor
drives
ââ Battery supplied applications
ââ Uninterruptible Power Supplies
(UPS)
ââ Switched Mode Power Supplies
(SMPS)
ââ Power supplies for welding
applications.
Application domain
ââ Industrial.
Notes: 1) Absolute value @ TA = 25°C, 2.475 < VOUT < 2.525
2) IS = IP/NS
3) Only due to TCRIM.
110218/19
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
Page 1/3
www.lem.com
|
▷ |