LA35-NP Datasheet, PDF (1/2 Pages) LEM – Current Transducer LA 35-NP

Current Transducer LA 35-NP
For the electronic measurement of currents : DC, AC, pulsed,
mixed, with a galvanic isolation between the primary circuit
(high power) and the secondary circuit (electronic circuit).
I_PN = 7-8-11-17-35 A
Electrical data
I_PN
Primary nominal r.m.s. current
I
Primary current, measuring range
P
R_M Measuring resistance
with ± 15 V
@ ± 35 At _max
@ ± 70 At
max
I_SN
Secondary nominal r.m.s. current
K _N Conversion ratio
V_C Supply voltage (± 5 %)
I_C
Current consumption
V_d
R.m.s. voltage for AC isolation test, 50 Hz, 1 mn
V_b
R.m.s. rated voltage ²⁾, safe separation
basic isolation
35 ¹⁾
At
0 .. ± 70
At
R_{M min}
R_{M max}
60
320 Ω
60
85
Ω
35
mA
1-2-3-4-5 : 1000
± 15
V
10 + I_S
mA
2.5
kV
600
V
1700
V
Accuracy - Dynamic performance data
X
ε_L
I
O
I_OM
I
OT
t_r
di/dt
f
Accuracy @ I_PN , T_A = 25°C
Linearity
± 0.5
%
< 0.2
%
Typ Max
Offset current ³⁾ @ I = 0, T = 25°C
P
A
± 0.10 ± 0.20 mA
Residual current ⁴⁾ @ I_P = 0, after an overload of 3 x I_PN ± 0.05 ± 0.15 mA
Thermal drift of I
O
- 25°C .. + 70°C ± 0.15 ± 0.50 mA
Response time ⁵⁾ @ 90 % of I_{P max}
di/dt accurately followed
<1
> 50
µs
A/µs
Frequency bandwidth (- 1 dB)
DC .. 150
kHz
General data
T_A
Ambient operating temperature
T
Ambient storage temperature
S
R _P Primary resistance per turn @ T_A = 25°C
R
Secondary coil resistance @ T = 70°C
S
A
R _IS Isolation resistance @ 500 V, T_A = 25°C
m
Mass
Standards ⁶⁾
- 25 .. + 70
°C
- 40 .. + 85
°C
< 1.25
mΩ
80
Ω
> 1500
MΩ
22
g
EN 50178
Features
•Closed loop (compensated) multi-
range current transducer using the
Hall effect
•Insulated plastic case recognized
according to UL 94-V0.
Advantages
•Excellent accuracy
•Very good linearity
•Low temperature drift
•Optimized response time
•Wide frequency bandwidth
•No insertion losses
•High immunity to external
interference
•Current overload capability.
Applications
•AC variable speed drives and servo
motor drives
•Static converters for DC motor drives
•Battery supplied applications
•Uninterruptible Power Supplies
(UPS)
•Switched Mode Power Supplies
(SMPS)
•Power supplies for welding
applications.
Notes : ¹⁾ In order to avoid over-heating, it is necessary that the recommended
primary connections be followed (see table page 2)
2) _{Pollution class 2}
3) _{Measurement carried out after 15 mn functioning}
4) _{The result of the coercive field of the magnetic circuit}
5) _{With a di/dt of 100 A/µs}
6) _{A list of corresponding tests is available}
980909/1
LEM Components
w w w .lem.com