HY50P Datasheet, PDF (1/2 Pages) LEM – Current Transducers, HY 50-P/SP1

Current Transducers, HY 50-P/SP1
For the electronic measurement of currents : DC, AC, pulsed...,
with a galvanic isolation between the primary circuit (high power)
and the secondary circuit (electronic circuit).
I = 50 A
PN
Electrical data
Primary nominal
r.m.s. current
I_PN (A)
50
Primary current
measuring range
I_P (A)
± 150
Primary
conductor
(mm)
1.6 x 3.5
Type
HY 50-P/SP1
V_C
I_C
Î_P
V_d
V_b
R _IS
V
OUT
R_OUT
R_L
Supply voltage (± 5 %)
single + 5
Current consumption
10
Overload capability (1 ms)
50 x I_PN
R.m.s. voltage for AC isolation test, 50/60Hz, 1 min 2.5
R.m.s. rated voltage,safe separation
500¹⁾
Isolation resistance @ 500 VDC
> 1000
Output
voltage
@
+
I,
PN
R
L
=
10
kΩ,
T
A
=
25°C
2.5
Output voltage @
-
I,
PN
R
L
=
10
kΩ,
T
A
=
25°C
1.5
Output internal resistance
100
Load resistance
>1
Accuracy - Dynamic performance data
V DC
mA
kV
V
MΩ
V
V
Ω
kΩ
X
ε_L
V_OE
V_OH
V_OT
ε TC _G
t
r
di/dt
f
Accuracy @ I_PN, T_A = 25°C (without offset)
Linearity ²⁾ (0 .. ± I_PN)
Electrical offset voltage, T_A = 25°C
Hysteresis offset voltage @ I_P = 0
after an excursion of 1 x I_PN
Thermal drift of V_OE
Thermal drift of the gain (% of reading)
Response time @ 90% of I
P
di/dt accurately followed
Frequency bandwidth ³⁾ (0 .. - 3 dB)
<±2
%
< ± 1 % of I_PN
< + 2V ± 25 mV
< ± 10 mV
typ ± 1.5 mV/K
max ± 3
mV/K
< ± 0.1 %/K
<5
µs
> 50
A/µs
DC .. 50 kHz
General data
T
Ambient operating temperature
A
T_S
Ambient storage temperature
m
Mass
Standards ⁴⁾
- 10 .. + 80 °C
- 25 .. + 85 °C
< 14
g
EN50178
Features
• Hall effect measuring principle
• Galvanic isolation between primary
and secondary circuit
• Isolation voltage 2500 V~
• Compact design for PCB mounting
• Low power consumption
•
Extended
measuring
range
(3
x
I)
PN
• Insulated plastic case recognized
according to UL 94-V0.
Advantages
• Easy mounting
• Small size and space savings
• Only one design for wide current
ratings range
• High immunity against external
interference
Applications
• General purpose inverters
• Switched-Mode Power Supplies
(SMPS)
• AC motor speed control
• Battery supplied applications
• Uninterruptible Power Supplies
(UPS)
• Power supplies for welding
applications.
Notes : ¹⁾ Pollution class 2, overvoltage category III
2) _{Linearity data exclude the electrical offset.}
3) _{Please refer to derating curves in the technical file to avoid excessive}
core heating at high frequency
4) _{Please consult characterisation report for more techinical details and}
application advises.
980723/2
LEM Components
www.lem.com