HLSR-P-SP33 Datasheet, PDF (1/12 Pages) LEM – Current Transducer

Current Transducer HLSR-P/SP33 series I_PN = 10 ... 50 A
Ref: HLSR 10-P/SP33, HLSR 20-P/SP33, HLSR 32-P/SP33, HLSR 40-P/SP33,
HLSR 50-P/SP33
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation
between the primary and the secondary circuit.
Features
●● Open loop multi-range current transducer
●● Voltage output
●● Galvanic separation between primary and secondary
●● Low power consumption
●● Compact design for through-hole PCB mounting
●● Factory calibrated
●● High bandwidth, very low loss magnetic core.
Special feature
●● Single supply +3.3 V.
Advantages
●● Extremely low profile: h = 12 mm
●● Low foot-print
●● Low offset drift
●● Over-drivable V_ref.
Applications
●● AC variable speed and servo motor drives
●● Static converters for DC motor drives
●● Battery supplied applications
●● Uninterruptible Power Supplies (UPS)
●● Switched Mode Power Supplies (SMPS)
●● Power supplies for welding applications
●● Combiner box
●● MPPT.
Standards
●● EN 50178: 1997
●● IEC 61010-1: 2010
●● IEC 61326-1: 2012
●● UL 508: 2010.
Application Domain
●● Industrial.
N°97.J3.13.033.0, N°97.J3.17.033.0, N°97.J3.J3.033.0, N°97.J3.23.033.0, N°97.J3.25.033.0
7September2015/Version 7
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice
Page 1/12
www.lem.com