CTSR-0.6-P Datasheet, PDF (1/11 Pages) LEM – Current Transducer CTSR series

Current Transducer CTSR series
I_PRN = 300, 600 mA
Ref: CTSR 0.3-P, CTSR 0.6-P
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between
the primary circuit and the secondary circuit.
Features
●● Closed loop (compensated) current transducer
●● Voltage output
●● Single supply voltage
●● PCB mounting.
Advantages
●● High accuracy
●● Very low offset drift over temperature
●● Wide aperture
●● High overload capability
●● High insulation capability
●● Reference pin with two modes, Ref In and Ref Out
●● Degauss and test functions.
Applications
●● Residual current measurement
●● Leakage current measurement in transformerless PV
inverters
●● First human contact protection of PV arrays
●● Failure detection in power sources
●● Symmetrical fault detection (e.g. after motor inverter)
●● Leakage current detection in stacked DC sources
●● Single phase or three phase nominal current measurement
up to ± 30 A per wire (DC or AC).
Standards
●● EN 50178: 1997
●● IEC 61010-1: 2010
●● UL 508: 2010.
Application Domain
●● Industrial
●● Suitable to fulfil VDE 0126-1-1 and UL 1741.
N°97.G9.A2.000.0, N°97.G9.G6.000.0
28January2014/version 7
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice
Page 1/11
www.lem.com