AK-C- Datasheet, PDF (1/2 Pages) LEM – AC Current transducer

AC Current transducer AK-C-
Transducer for the electronic measurement of AC sinusoidal waveforms,
with galvanic isolation between the primary (High power) and the
secondary circuits (Electronic circuit). Jumper selectable ranges and
self powered transducers.
I_PN = 10 .. 200 A
Electrical data
Primary Nominal Current Analogue Output Signal¹⁾
I_PN (A.t.RMS)
10,20,50
10,20,50
100,150,200
100,150,200
V_OUT (V DC)
5
10
5
10
Type
RoHS
Date code
AK 50 C5
AK 50 C10
AK 200 C5
AK 200 C10
planned
MAY 2006
planned
JUNE 2006
Vc Supply voltage
R_L Load resistance
V_b Rated voltage (CAT III, PD2)
V_d RMS Isolation voltage test, 50 Hz, 1mn
f
Frequency bandwith
Self Powered
1
150
3
50-60
MΩ
V AC
kV AC
Hz
Accuracy - Dynamic performance data
Features
• AC sinusoïdal measurement
• Average responding
• Self powered transducers
• Panel mounting
• Voltage output
• Jumper selectable ranges
Advantages
• Large aperture
• High isolation between primary and
secondary circuits
• Easy to mount
X
Accuracy @ I_PN, T_A=25°C
t
Response time @ 90% of I
r
PN
±1
< 100
General data
T
Ambient operating temperature (0-95% RH)
A
T
Ambient storage temperature
S
m Mass
Safety
EMC
- 20 ..+ 50
- 20 ..+ 85
120
IEC 61010-1
EN 61326
Note : ¹⁾ For 0-5 V output model, no saturation output up to 8.2 V
and for 0-10 V output model, no saturation output up to 15 V.
% _Applications
mS
• Automation systems
Analog current reading for remote
monitoring (e.g. motor).
• Data loggers
°C
Self-powered transducer does not
drain data logger batteries.
°C
• Panel meters
g
Simple connection displays power
consumption.
Options on request
• DIN mounting
LEM
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice.
060816/6
Page 1/2
www .lem.com