PLED06B Datasheet, PDF (1/3 Pages) Shanghai Leiditech Electronic Technology Co., Ltd – Bi-directional Open LED protector

PLED06B
Bi-directional Open LED protector
Description
The open LED protector provides a switching electronic
shunt path when an LED in an LED array fails as an
open circuit. This ensures that the entire array of LEDs
will continue to function even if a single LED in the array
does not.
This provides higher reliable lighting functions in
applications such as headlights, aircrafts, aircraft runway
lighting, Road side warning lights, etc.
This device is compatible with one, two and Three watt
LEDs that have a nominal 3V forward characteristic.
Features & Benefits
Dimensions SMA/DO-214AC
Schematic Symbol
MT2
Fast switching
Automatically resets after power cycle
Compatible with industrial lighting environments
Compatible with PWM frequencies up to 30 kHz
RoHS compliant and halogen-free
Control
Circuit
MT1
Cathode
Electrical Characteristics(TA=25°C unless otherwise specified)
Part Number
Device
VDRM
IDRM
VBR
Is
IT
VT
IH
Critical
rate of
Marking _{Min (V) Max μA Max (V) Max (mA) Max (A) Max (V) Min(mA) rise dV/dt}
PLED06B PLED06
6.0
10
15
600
1
1.5
5
250V/μs
General Notes:
◆ All measurements are made at an ambient temperature of 25℃.Ipp applies to -40℃ through +85℃
temperature range.
◆ Special voltage (VBO and VDRM) and holding current (IH) requirements are available up on request.
Electrical Parameters(Tamb=25℃)
Symbol
VDRM
IDRM
VBR
IS
Rev : 01.06.2014
Parameter
Stand-off voltage is
measured at IDRM
Leakage current is
measured at VDRM
Break over voltage is
measured at 100V/μs
Bread over current
Symbol
IH
VT
IT
1/3
Parameter
Holding current
ON-state current
ON-state voltage
www.leiditech.com