LED-S-45-10 Datasheet, PDF (1/2 Pages) Leddar Technology – A UNIQUE DETECTION AND RANGING SOLUTION

IS16 Industrial Leddar^TM Sensor
At the heart of the IS16 Industrial Leddar^TM Sensor lies patented Leddar™ Technology, designed to DETECT, LOCATE and MEASURE all types
of objects—either solid or liquid. The IS16 Industrial Leddar™ Sensor provides both distance and angular positioning while performing
continuous analysis of the area. Specifically designed for the industrial market, this unique sensor is optimized for 0 to 50 meter (165 ft.)
detection and ranging applications.
Based on time-of-flight measurements using pulses from infrared LEDs, combined with 16 independent active segments, the IS16
Industrial Leddar™ Sensor provides fast, accurate and non-stop detection and ranging. The 45-degree beam, produced by diffused light
pulses and processed through innovative algorithms, enables the detection of a wide range of objects under various environmental
conditions.
Main Features
- Easy to integrate
- 16 independent segments with simultaneous
acquisition capabilities
- 45-degree beam, for optimized field of view
- 0 to 50 meter (165 ft.) detection
- Rapid data acquisition time - 50 Hz
- IP67 weather-resistant enclosure
- LCD display for configuring and monitoring ongoing operations
Leddar™ Technology offers the best cost/performance ratio.
Presence Detection Mode
Leddar™ Capabilities
Presence Detection Mode
This IS16 Industrial Leddar™ Sensor includes Presence Detection
Mode, where the PNP/NPN outputs can be set according to
whether or not there are objects within the configured detection
zones (two zones, one per output).
With the Teach Configuration feature, the sensor can define
the perimeter of its surroundings as a detection zone. In Quick
Mode, a near limit and a far limit can be easily configured to
quickly define zones. Alternatively, zones can also be configured
manually in Advanced Mode where near and far limits can be set
for each segment and unwanted segments can be deactivated.
Raw Measurements Mode
A custom zone can be defined and
unneeded segments may be disabled
Raw Measurements Mode
The IS16 Industrial Leddar™ Sensor provides the capabilities to
acquire all measurements, from all segments in real time through
the RS-485 link. Each measurement provides the distance of the
detected object, the index of the segment it was detected in,
and the intensity of the measurement (indication of how much
light was reflected off the object and captured by the sensor).
LEDDAR™ MAKES COUNTLESS APPLICATIONS A REALITY!