|
ISPPAC-POWR1014_08 Datasheet, PDF (1/46 Pages) Lattice Semiconductor – In-System Programmable Power Supply Supervisor, Reset Generator and Sequencing Controller | |||
|
ispPAC-® POWR1014/A
In-System Programmable Power Supply Supervisor,
Reset Generator and Sequencing Controller
June 2008
Data Sheet DS1014
Features
â Monitor and Control Multiple Power Supplies
⢠Simultaneously monitors up to 10 power
supplies
⢠Provides up to 14 output control signals
⢠Programmable digital and analog circuitry
â Embedded PLD for Sequence Control
⢠24-macrocell CPLD implements both state
machines and combinatorial logic functions
â Embedded Programmable Timers
⢠Four independent timers
⢠32µs to 2 second intervals for timing sequences
â Analog Input Monitoring
⢠10 independent analog monitor inputs
⢠Two programmable threshold comparators per
analog input
⢠Hardware window comparison
⢠10-bit ADC for I2C monitoring (ispPAC-
POWR1014A only)
â High-Voltage FET Drivers
⢠Power supply ramp up/down control
⢠Programmable current and voltage output
⢠Independently conï¬gurable for FET control or
digital output
â 2-Wire (I2C/SMBus⢠Compatible) Interface
⢠Comparator status monitor
⢠ADC readout
⢠Direct control of inputs and outputs
⢠Power sequence control
⢠Only available with ispPAC-POWR1014A
â 3.3V Operation, Wide Supply Range 2.8V to
3.96V
⢠In-system programmable through JTAG
⢠Industrial temperature range: -40°C to +85°C
⢠48-pin TQFP package, lead-free option
Application Block Diagram
Primary
Supply
3.3V
Primary
Supply
Primary
Supply
2.5V
1.8V
Primary
Supply
POL#1
Primary
Supply
POL#N
Other Control/Supervisory
Signals
12 Digital
Outputs
2 MOSFET
Drivers
ADC*
4 Timers
ispPAC-POWR1014A
*ispPAC-POWR1014A only.
CPLD
24 Macrocells
53 Inputs
4 Digital
Inputs
I2C
Interface
I2C
Bus*
CPU
Description
Latticeâs Power Manager II ispPAC-POWR1014/A is a
general-purpose power-supply monitor and sequence
controller, incorporating both in-system programmable
logic and in-system programmable analog functions
implemented in non-volatile E2CMOS® technology. The
ispPAC-POWR1014/A device provides 10 independent
analog input channels to monitor up to 10 power supply
test points. Each of these input channels has two inde-
pendently programmable comparators to support both
high/low and in-bounds/out-of-bounds (window-com-
pare) monitor functions. Four general-purpose digital
inputs are also provided for miscellaneous control func-
tions.
The ispPAC-POWR1014/A provides 14 open-drain digi-
tal outputs that can be used for controlling DC-DC con-
verters, low-drop-out regulators (LDOs) and opto-
couplers, as well as for supervisory and general-pur-
pose logic interface functions. Two of these outputs
(HVOUT1-HVOUT2) may be conï¬gured as high-voltage
© 2008 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other
brand or product names are trademarks or registered trademarks of their respective holders. The speciï¬cations and information herein are subject to change without
notice.
www.latticesemi.com
2-1
DS1014_01.6
|
▷ |