ML7416N-060 Datasheet, PDF (1/69 Pages) LAPIS Semiconductor Co., Ltd. – Broadband RF Transceiver IC with Built-in MCU

ML7416N-060
Sub-GHz (900 MHz Band) Broadband RF Transceiver IC with Built-in MCU
FEDL7416N-060-01
Issue date: Apr 30, 2015
1. General Description
ML7416 is a low power consumption LSI for sub-GHz broadband radio communication, which integrates the MCU
block and RF block in a single chip.
The features are shown below. * For details of the RF block, refer to ML7396B Data Sheet (FJDL7396A_B_E).
• Industry-standard ARM Cortex-M0+ CPU core * Maximum operating frequency: 40 MHz
• 512 KB flash memory (for program [256 KB x 2 bank configuration is possible]. Can be used as data flash)
• 64 KB RAM (for data. Whether to hold data in low power consumption mode can be selected)
• Start-stop synchronous serial communication interface (UART) * Max. 3 ch
• Synchronous serial communication interface (SPI) * Max. 2 ch (additionally, 1 ch for SPI dedicated to RF control,
which does not exist on the external port)
• WDT
• General-purpose IO
• Timer * 32-bit timer x 10 ch. Among them, 4 ch (2 sets) can be used as 64-bit timer by the cascade connection
• RTC
• Flexible timer (FTM) (PWM mode, etc.)
• I2C * Master/slave supported
• RF control transmit/receive data interface (DIO) * As this is dedicated to RF control, it does not have an external port
• Random number generation circuit (RAND)
• Clock correction counter (CLK_Timer)
• SWD (2-wire serial wire debug port)
• X’tal OSC * 32.768 KHz
• PLL * Multiplying/dividing 32 KHz
• ADC * 10 bits, Max. 3 ch (Max. 2 ch when using the temperature sensor function)
• Voltage drop detection (LVD)
• Temperature sensor (TEMP)
• RC OSC * 40 MHz, 32 KHz
• AES * ECB, CBC, CTR, CCM, and GCM supported
• DMA controller * Transfer between SPI and RAM and between AES and RAM, 4 ch
• Flash DMA controller * Write to flash, Verify
1