ML7396A Datasheet, PDF (1/140 Pages) LAPIS Semiconductor Co., Ltd. – Sub GHz band short range wireless transceiver IC

ML7396A/B/E
Sub GHz band short range wireless transceiver IC
FEDL7396A/B/E-07
Issue Date: Jan. 15, 2015
■Overview
The ML7396 family (ML7396A (915MHz band), ML7396B (920MHz band), and ML7396E (868MHz band)) are ICs for
transmitting/receiving data which integrate the RF, IF, MODEM and HOST interface sections into one chip for the specified low
power radio communication. The ML7396 family is used for FCC PART15, ARIB STD-108(specified low-power radio station,
920MHz-band telemeter, telecontrol and data transmission radio equipment), ETSI EN 300 220 compliant radio station, and uses
a packet transmission function of IEEE802.15.4d and IEEE802.15.4g.
■Features
• Compliant to ARIB STD T-108 (ML7396B)
• Compliant to FCC Part15 (ML7396A)
• Compliant to ETSI EN 300-220 (ML7396E)
• High resolution modulation by using fractional-N PLL direct modulation.
• Modulation: GFSK / GMSK, FSK / MSK
(MSK is FSK transmission of modulation index: m=0.5 )
• Data rates: 10 / 20 / 40 / 50 / 100 / 150 / 200 kbps and 400 kbps (option)
• Data coding: NRZ and Manchester codes
• Programable channel filter suited to data rates
• Programmable frequency deviation function
• TX and RX data inverse function
• 36MHz oscillator circuit
• TCXO direct inputs available
• Oscillator capacitance fine tuning function
• Frequency fine tuning function (using fractional-N PLL)
• Synchronous serial peripheral interface (SPI)
• On chip TX PA (20mW/10mW/1mW selectable)
• External TX PA control function
• RSSI indicator and threshold judgement function
• AFC function
• Antenna diversity function
• Test pattern generator (PN9, CW, 01 pattern,
all”1”, all“0”)
• FEC function
• CRC32 (Note: This function is not compliant to IEEE802.15.4g.)
• IEEE802.15.4d/g support
o Two 256-byte FIFOs (TX/RX common use)
o Max packet length 2047 byte (IEEE802.15.4g mode)
o RX Preamble pattern detection function (Programmable between 1 to 15 byte)
o Programmable TX preamble length (Max 255 byte)
o SFD generation and detection function (Max 4 byte)
o Programmable CRC function (CRC32, CRC16-IBM, CRC16, CRC8 or no-CRC)
o Whitening function
o Address filtering function
o Automatic Acknowledge (Ack TX or RX) function
o FEC function (IEEE802.15.4g mode)
Note; Interleaving mode is not compliant to IEEE802.15.4g.
1/140