ML610Q438 Datasheet, PDF (1/39 Pages) List of Unclassifed Manufacturers – 8-bit Microcontroller with a Built-in LCD driver

ML610Q438/ML610Q439
8-bit Microcontroller with a Built-in LCD driver
FEDL610Q438-04
Issue Date: May. 08, 2015
GENERAL DESCRIPTION
This LSI is a high-performance 8-bit CMOS microcontroller into which rich peripheral circuits, such as synchronous serial port,
UART, I²C bus interface (master), melody driver, battery level detect circuit, RC oscillation type A/D converter, and LCD
driver, are incorporated around 8-bit CPU nX-U8/100.
The CPU nX-U8/100 is capable of efficient instruction execution in 1-instruction 1-clock mode by 3-stage pipe line architecture
parallel procesing. The Flash ROM that is installed as program memory achieves low-voltage low-power consumption operation
(read operation) equivalent to mask ROM and is most suitable for battery-driven applications.
The on-chip debug function that is installed enables program debugging and programming.
FEATURES
• CPU
− 8-bit RISC CPU (CPU name: nX-U8/100)
− Instruction system: 16-bit instructions
− Instruction set: Transfer, arithmetic operations, comparison, logic operations, multiplication/division,
bit manipulations, bit logic operations, jump, conditional jump, call return stack manipulations,
arithmetic shift, and so on
− On-Chip debug function
− Minimum instruction execution time
30.5 µs (@32.768 kHz system clock)
0.24 4µs (@4.096 MHz system clock)
• Internal memory
− Internal 128KByte Flash ROM (64K×16 bits) (including unusable 1KByte TEST area)
− Internal 6KByte Data RAM (6144×8 bits), 1KByte Display Allocation RAM (1024 x 8bit)
− Internal 192-byte RAM for display
• Interrupt controller
− 2 non-maskable interrupt sources (Internal source: 1, External source: 1)
− 27 maskable interrupt sources (Internal sources: 19, External sources: 8)
• Time base counter
− Low-speed time base counter ×1 channel
Frequency compensation (Compensation range: Approx. −488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm)
− High-speed time base counter ×1 channel
• Watchdog timer
− Non-maskable interrupt and reset
− Free running
− Overflow period: 4 types selectable (125ms, 500ms, 2s, and 8s)
• Timers
− 8 bits × 4 channels (16-bit configuration available)
• 1 kHz timer
− 10 Hz/1 Hz interrupt function
1/39