ML610407 Datasheet, PDF (1/34 Pages) List of Unclassifed Manufacturers – 8-bit Microcontroller with a Built-in LCD driver

ML610407/ML610408/ML610409
8-bit Microcontroller with a Built-in LCD driver
FEDL610409-08
Issue Date:May. 23, 2014
GENERAL DESCRIPTION
ML610407/ML610408/ML610409 is a high performance CMOS 8-bit microcontroller into which peripheral circuits, such as
the synchronous serial port, UART, melody driver, RC oscillation type A/D converter, and LCD driver, are incorporated around
LAPIS Semiconductor-original 8-bit CPU nX-U8/100. ML610407/ML610408/ML610409 operates in both high/low-speed
mode and power-saving mode, it is most suitable for battery operated products.
For industrial use, ML610407P/ML610408P/ML610409P with the extended operating ambient temperature ranging from -40°C
to 85°C are available.
FEATURES
• CPU
- 8-bit RISC CPU (CPU name: nX-U8/100)
- Instruction system: 16-bit length instruction
- Instruction set: Transfer, arithmetic operations, comparison, logic operations, multiplication/division, bit manipulations,
bit logic operations, jump, conditional jump, call return stack manipulations, arithmetic shift, and so on
- On-Chip debug function
- Minimum instruction execution time
30.5 µs (@ 32.768 kHz system clock)
2 µs (@ 500 kHz system clock)
0.5 µs (@ 2 MHz system clock)
• Internal memory
- Internal 16KByte maskROM (8K x 16 bits) (including unusable 1KByte TEST area)
- Internal 1KByte RAM (1024 x 8 bits)
• Interrupt controller
- 1 non-maskable interrupt source:
Internal source: 1 (Watchdog Timer)
- 27 maskable interrupt sources:
Internal source: 14 (Synchronous serial port 0, Synchronous serial port 1, Timer 0, Timer 1, Timer 2, Timer 3, UART0,
Melody 0, RC Oscillation type A/D converter, PWM0, TBC128Hz, TBC32Hz, TBC16Hz, TBC2Hz)
External source: 13 (P00, P01, P02, P03, P04, P50, P51, P52, P53, P54, P55, P56, P57) *
*: For P50 to P57, the interrupt sources are ORed into a single interrupt request.
• Time base counter
- Low-speed time base counter x 1 channel
Frequency compensation (Compensation range: Approx. -488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm)
- High-speed time base counter x 1 channel
• Watchdog timer
- Non-maskable interrupt and reset
- Free running
- Overflow period: 4 types selectable (125ms, 500ms, 2s, 8s)
• Timers
- 8 bits x 4 channels [also available is 16-bit configuration (using Timers 0 and 1, or Timers 2 and 3) x 2 channels]
- Clock frequency measurement function mode (16-bit configuration using Timers 2 and 3 x 1 channel only)
1/34