ML13158 Datasheet, PDF (1/23 Pages) LANSDALE Semiconductor Inc. – Wideband FM IF Subsystem For Dect and Digital Applications

ML13158
Wideband FM IF Subsystem
For Dect and Digital Applications
Legacy Device: Motorola MC13158
The ML13158 is a wideband IF subsystem that is designed for high per-
formance data and analog applications. The ML13158 has an on–board
grounded collector VCO transistor that may be used with a fundamental
or overtone crystal in single channel operation or with a PLL in
multi–channel operation. The mixer is useful to 500 MHz and may be
used in a balanced differential or a single ended configuration. The IF
amplifier is split to accommodate two low cost cascaded filters. RSSI
output is derived by summing the output of both IF sections. A precision
data shaper has an Off function to shut the output off to save current. An
enable control is provided to power down the IC for power management
in battery operated applications.
Applications include DECT, wideband wireless data links for personal
and portable laptop computers and other battery operated radio systems
which utilize GFSK, FSK or FM modulation.
• Designed for DECT Applications
• 1.8 to 6.0 Vdc Operating Voltage
• Low Power Consumption in Active and Standby Mode
• Greater than 600 kHz Detector Bandwidth
• Data Slicer with Special Off Function
• Enable Function for Power Down of Battery Operated Systems
• RSSI Dynamic Range of 80 dB Minimum
• Low External Component Count
• Operating Temperature Range – TA = –40 to +85°C
32
1
QFP 32 = 8P
PLASTIC QFP PACKAGE
CASE 873
CROSS REFERENCE/ORDERING INFORMATION
PACKAGE MOTOROLA LANSDALE
QFP 32
MC13158FTB ML13158-8P
Note: Lansdale lead free (Pb) product, as it
becomes available, will be identified by a part
number prefix change from ML to MLE.
Page 1 of 23
www.lansdale.com
Issue B