PV3 Datasheet, PDF (1/2 Pages) DENSEI-LAMBDA – Single in-line DC-DC converter Single output 1.5W/3W

PV-SERIES
Single in-line DC-DC converter
Single output 1.5W/3W
Ⅵ Model name
PV 3 - 24 - 5
Series Output
name power
Input
voltage
Output
voltage
Ⅵ PV1R5 (1.5W type) Specifications
Ⅵ Features
ⅷ Input/Output isolation
ⅷ Single in-line type
ⅷ Over current protection
ⅷ Adjustable output voltage
Model
PV1R5-5-5
PV1R5-5-12
PV1R5-12-5
PV1R5-24-5
Input Voltage
Vdc
5VDC (4.5 ~ 9.0V)
12VDC (9 ~ 18V)
24VDC (18 ~ 36V)
Output Voltage (*1)
Vdc
5V±5% (6V)
12V±5% (15V)
5V±5% (6V)
5V±5% (6V)
Output Current (max)
mA
0 ~ 300 (250)
0 ~ 125 (100)
0 ~ 300 (250)
0 ~ 300 (250)
Output Power (max)
W
1.5
1.5
1.5
1.5
Withstand Voltage
— Input to Output : 500VAC for 1 minute
Cooling
— Convection cooling
Operating Temperature
— –20 ~ +70°C (–20 ~ +50°C: 100%, +60°C: 70%, +70°C: 40%)
Ⅵ PV3 (3W type) Specifications
Model
PV3-5-5
PV3-5-12
PV3-12-5
PV3-24-5
Input Voltage
Vdc
5VDC (4.5 ~ 9.0V)
12VDC (9 ~ 18V)
24VDC (18 ~ 36V)
Output Voltage (*1)
Vdc
5V±5%
12V±5% (15V)
5V±5%
5V±5%
Output Current (max)
mA
0 ~ 600 (500)
0 ~ 250 (200)
0 ~ 600 (500)
0 ~ 600 (500)
Output Power (max)
W
3.0
3.0
3.0
3.0
Withstand Voltage
— Input to Output : 500VAC for 1 minute
Cooling
— Convection cooling
Operating Temperature
— –20 ~ +70°C (–20 ~ +50°C: 100%, +60°C: 70%, +70°C: 40%)
(*1) Refer to Terminal connection
(*2) External capacitors are required at both input and output.
(*3) Over current protection: Output current limiting automatic recovery. Avoid to operate overload or dead short for more than 30 seconds.
Ⅵ Outline drawing
PV1R5 (1.5W type)
PV3 (3W type)
PV1R5-48-5
48VDC (36 ~ 72V)
5V±5% (6V)
0 ~ 300 (250)
1.5
PV3-48-5
48VDC (36 ~ 72V)
5V±5%
0 ~ 600 (500)
3.0
1 : +V Output pin
2,3: NC No connect
4 : –V Output pin
5 : TRM Output voltage setting pin
7,8 : –V Input pin
9,10 : +V Input pin
1,2: +V Output pin
3,4: NC No connect
5,6: –V Output pin
7 : TRM Output voltage setting pin
9,10 : –V Input pin
11,12: +V Input pin
Ⅵ Terminal connection
Output voltage can be adjusted by TRM terminal.
Output power must be within the rating, when increasing the output voltage.
PP1R5 (1.5W type) 12V output: 5pin open 15V output: 5pin to 4pin connected
PP3 (3W type)
12V output: 7pin open 15V output: 7pin to 5pin (6pin) connected
(5V type adjustable to 6V)
123